KGL frame automaticlly hyfraulic curing press

Segmented Curing Press KGFL-series

Function:

KGL Two-piece curing press is used to cure/vulcanize bias OTR and giant OTR tyres with two-piece molds. The lower part of machine is flexible and stretchable, easy for loading and unloading tyre.
The outer mold applies optimal casting steel, bearing high internal pressure, and resisting deformation.
Based on different clients' technology needs and productivity, this model has some distinction in different parts, such as frame structure, control system, and pneumatic cylinder quantity, and so on.

Features:
1. Replaceable mold in certain range.
2. Designed with frame structure, bear high internal pressure.
3. Both PLC and manual control available.
4. Multi- interlock, safe operation.

Specifications:

Tire size range	18.5-25~~23.5-25
Maximum inner pressure(MPa)	<1.8
Steam pressure(MPa)	<0.6
Dimension (mm)	2850*2500*3250
Station pressure (Mpa)	8
Electric machine power (kw)	11
Weight (t)	~1.2
Power supply	AC380V,AC220V,50HZ
Compressed air source (MPa)	0.8

Note: The specifications mentioned above are only for reference, the actual parameters may be changed in line with the improvements of product design.

Contact Us!
English Service Hot Line: (+86) 13981391202  Mr. Li Po
Telephone: (+86)833-2595888  
Fax: (+86)833 -2599883
E-mail: yalun_mold@yahoo.cn
Skype ID: lipo97751
Address:
Nanxin East Road,
Leshan High-Tech Industrial Development Zone ,Sichuan,
China 614000

Relative Equipments:
FL Two-piece Curing Press
http://www.retreadingtech.com/info-879.html
KGL Two-piece Curing Press/Vulcanizing Machine
http://www.retreadingtech.com/info-876.html
Lifting Curing Press
http://www.retreadingtech.com/info-874.html
Uni-conical Segment Curing Press/Vulcanizing Machine
http://www.retreadingtech.com/info-873.html
HFL Segment Curing Press/Vulcanizing Machine
http://www.retreadingtech.com/info-867.html